Gear Pump ASG series
- Max. Temperature -80 degree Celsius
- Modified Version for High Temperature up to -200 degree Celsius
- Modified Version for Molasses and Vacuum Application
- Higher Aesthetic Value
- Single Helical Gears
- Hardened & Ground Shafts
| SR No. | PART | MOC. |
|---|---|---|
| 1 | CASING | CI GR. 20 |
| 2 | R.V.COVER | CI GR. 20 |
| 3 | GLAND COVER | CI GR. 20 |
| 4 | SHAFTS | EN-9 H & H |
| 5 | GEARS | EN-8 |
| 6 | GLAND SEAL | OIL SEAL |
| 7 | SHAFT BRG | SINTREAD BRONZE BUSH |
| 8 | R.V.PLUG | BRASS/M.S./ALLUMINIM |
- Max. Capacity-500Lpm
- Max. Pressure – 10 kg/cm2
- Single Helical Gears
- Hardened & Ground Shafts
- Max. Capacity-500Lpm
- Max. Pressure – 10 kg/cm2
| VISCOSITY | SPEED | CAPACITY |
|---|---|---|
| UP TO 500 CST | 1500 RPM | 100% |
| 500-1500 CST | 1000 RPM | 66% |
| 1500-5000 CST | 750 RPM | 50% |
| 5000-15000 CST | 500 RPM | 33% |
| 15000-30000 CST | 380 RPM | 25% |
| 30000-50000 CST | 300 RPM | 20% |
| 50000-100000 CST | 200 RPM | 13% |
| 100000-200000 CST | 150 RPM | 10% |
| PUMP MODEL | INLET OUTLET SIZE | CAPACITY | “RECOMMENDED MOTOR HP AT A DIFFERENTIAL PRESSURE OF ‘X’ Kg/Cm2 WITH 1500 SSU VISCOSITY & SPECIFIC GRAVITY @ 0.8g/CC | WT OF BARE PUMP SHAFT IN KG. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LPM | US GPM | M3/HR | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |||
| ASG-050 | 1/2″ x 1/2″ | 20 | 5.3 | 1.2 | 0.5 | 0.75 | 2.8 | ||||||||
| ASG-075 | 3/4″ x 3/4″ | 30 | 7.92 | 1.8 | 0.5 | 0.75 | 1 | 4.5 | |||||||
| ASG-100 | 1″ x 1″ | 50 | 13.2 | 3 | 0.5 | 0.75 | 1 | 1.5 | 6.2 | ||||||
| ASG-125 | 1 1/4″ x 1 1/4″ | 75 | 19.8 | 4.5 | 1 | 1.5 | 2 | 3 | 8.5 | ||||||
| ASG-150 | 1 1/2″ x 1 1/2″ | 110 | 29 | 6.6 | 1.5 | 2 | 3 | 5 | 10.5 | ||||||
| ASG-200 | 2″ x 2″ | 225 | 59.4 | 13.5 | 3 | 5 | 7.5 | 18 | |||||||
| ASG-250 | 2 1/2″ x 2 1/2″ | 350 | 92.5 | 21 | 5 | 7.5 | 10 | 12.5 | 27.3 | ||||||
| ASG-300 | 3″ x 3″ | 500 | 131.6 | 30 | 10 | 12.5 | 15 | 20 | 37 | ||||||